Back to Blog
Buying Guides 2026-11-13 Precision Optique 0 views

30mm vs 35mm vs 34mm Scope Ring Base: How to Choose

30mm vs 35mm vs 34mm Scope Ring Base: How to Choose

Compare INNOMOUNT ring bases for 30mm, 35mm, and 34mm tubes. Learn which diameter fits your scope and how height options affect your setup.

Match the Base Diameter to Your Scope Tube

The first and most important step is to match the base's inner diameter to your scope's main tube. An INNOMOUNT base designed for a 30mm tube will not securely hold a 35mm tube, and vice versa. Precision Optique offers dedicated bases for 30mm, 34mm, and 35mm tubes, so you must know your scope's tube diameter before ordering.

INNOMOUNT Base Diameter Options

  • Base de colliers INNOMOUNT - 30mm: La base d'anneau INNOMOUNT est conçue pour accueillir des tubes de 30mm. Choose this base if your scope has a 30mm main tube. It offers height variants from 3mm to 12mm for fine-tuning clearance.
    Base de colliers INNOMOUNT - 30mm
    Base de colliers INNOMOUNT - 30mm
  • Base de colliers INNOMOUNT - 35mm: La base d'anneau INNOMOUNT est conçue pour accueillir des tubes de 35mm. Select this base for scopes with a 35mm tube. It comes in 3mm, 6mm, and 9mm heights.
    Base de colliers INNOMOUNT - 35mm
    Base de colliers INNOMOUNT - 35mm
  • Base de colliers - Diamètre 34mm: La base d'anneau INNOMOUNT est conçue pour accueillir des tubes de 34mm. This base fits 34mm tubes, a common size for many tactical and long-range scopes. Available in 3mm, 6mm, and 9mm heights.

Height Variants: Fine-Tune Your Optic Position

Each INNOMOUNT base is available in multiple height options, allowing you to adjust the vertical position of your scope relative to the rifle's receiver or rail. A lower height (3mm) keeps the scope close to the bore axis, which can improve cheek weld and reduce parallax. Taller heights (6mm, 9mm, or 12mm) provide extra clearance for larger objective lenses, flip-up covers, or thicker barrels.

Which Height Should You Pick?

  • 3mm height: Best for standard scopes with moderate objective lenses and slim barrels. Provides the lowest profile.
  • 6mm height (extension +3mm): A good middle ground for most setups. Offers a bit more clearance without raising the scope too high.
  • 9mm height (extension +6mm): Useful for scopes with larger objective lenses or when using thick flip-up covers.
  • 12mm height (extension +9mm): Only available for the 30mm base. Ideal for very large objectives or when you need maximum clearance.

Compatibility Check Before You Buy

Before purchasing, confirm your scope's tube diameter by checking its specifications or measuring it with calipers. Also verify that the base's mounting interface matches your rifle's rail or receiver. The catalog does not specify the mounting interface type (e.g., Picatinny, Weaver, or dovetail), so you may need to consult your rifle's manual or contact Precision Optique for compatibility details.

Related Articles

Customer Service
Home
Products
Cart
Profile