Back to Blog
How-to Guides 2026-11-20 Precision Optique 0 views

Flex Offset Tactical Mount: Installation and Use

Flex Offset Tactical Mount: Installation and Use

Learn how to install and use the HMS Henneberger Flex Offset mount on a Picatinny rail for tactical optics. Step-by-step guide with compatibility and setup tips.

What the Flex Offset Mount Does

The HMS Henneberger Flex Offset mount is designed to attach optical accessories like red dot sights, scopes, or tactical lights to a Picatinny rail with a 50mm lateral offset. This offset shifts the accessory away from the rifle's centerline, improving ergonomics and allowing faster access to a secondary optic or a light without removing the primary sight.

The mount is made from anodized aluminum for a good balance of weight and durability. It uses a quick-release clamping system that requires no tools for installation or removal, making it practical for field adjustments.

Key Specifications from the Catalog

  • Montage amovible tactique Flex offset: Compatible with all Picatinny rails, making it versatile for various tactical setups. You can use this mount on any rifle, carbine, or shotgun that has a Picatinny top rail, without needing adapters.
    Montage amovible tactique Flex offset
    Montage amovible tactique Flex offset
  • Montage amovible tactique Flex offset: 50mm lateral offset provides flexible accessory positioning. The offset allows you to mount an optic or light to the side, keeping the top rail free for a primary scope or iron sights.
  • Montage amovible tactique Flex offset: Quick-release clamping system enables tool-free mounting and dismounting. You can attach or remove the mount quickly in the field without wrenches, which is useful when switching between accessories.
  • Montage amovible tactique Flex offset: Total height of 24 mm, ensuring a proper sight line for the mounted accessory. The 24 mm height is designed to place a red dot or other optic at a comfortable eye level when used as an offset sight.

Installing the Flex Offset Mount on a Picatinny Rail

The installation is straightforward thanks to the quick-release system. Follow these steps for a secure fit.

  1. 1. Inspect the Picatinny rail: Ensure the rail is clean and free of debris. The mount's clamping system engages with the rail's cross-slots, so any obstructions can prevent proper locking.
  2. 2. Position the mount on the rail: Slide the Flex Offset mount onto the Picatinny rail at the desired location. The 50mm offset can be oriented to the left or right side depending on your preference and shooting hand.
  3. 3. Tighten the quick-release lever: Close the lever firmly by hand until the mount is snug against the rail. The lever should require moderate force to close; if it closes too easily, the clamp may need adjustment (not covered in the supplied catalog).
  4. 4. Verify the mount is secure: Try to rotate or slide the mount by hand. It should not move. If it shifts, reopen the lever and reposition before tightening again.
  5. 5. Attach the optical accessory: Using the accessory's own mounting hardware, attach your optic or light to the top of the Flex Offset mount. Ensure it is properly aligned before tightening.

Offset Mount Zeroing Considerations

Because the Flex Offset mount shifts your accessory 50 mm to the side, you cannot zero it the same way as a centerline-mounted optic. The offset means your point of impact will shift horizontally relative to the bore at different distances. This is normal for all offset mounts.

To zero an offset red dot, start at a close range (e.g., 25 yards) and adjust windage and elevation so the dot aligns with the bullet impact at that distance. Be aware that at longer ranges, the horizontal offset will cause the point of impact to shift left or right depending on the offset direction. This is a known trade-off of any offset mount and is not a defect.

Choosing the Right Variant for Your Optic

The Flex Offset mount is available in several variants that differ in height and MOA cant. The catalog lists options for Swarovski (24 mm height, with or without 20 MOA) and Zeiss (23 mm height, with or without 20 MOA). The height affects the alignment of your optic's sight line with your eye, while the 20 MOA variant adds a built-in elevation cant useful for long-range shooting.

If you are using a Swarovski scope, choose the 24 mm height variant. For a Zeiss scope, the 23 mm height is the correct choice. The 20 MOA version is recommended if you plan to shoot at extended distances and want extra elevation adjustment range.

What the Catalog Does Not Confirm

The supplied catalog does not specify a maximum weight limit for accessories mounted on the Flex Offset mount. It also does not provide torque specifications for the quick-release lever or the accessory mounting screws. When attaching heavy optics, ensure the mount feels secure and does not shift under recoil. If you need exact torque values, consult the manufacturer directly.

Additionally, the catalog does not include instructions for adjusting the clamp tension if the lever is too loose or too tight. The quick-release system is designed for tool-free use, but minor adjustments may be possible by turning a tension screw (not confirmed in the catalog).

Related Articles

Customer Service
Home
Products
Cart
Profile