Terug naar blog
Handleidingen 2026-11-20 Precision Optique 0 weergaven

Merkel Weaver/Picatinny Mount: Installation Guide

Merkel Weaver/Picatinny Mount: Installation Guide

Learn how to install the INNOMOUNT quick-release mount on a Merkel rifle with a Weaver/Picatinny rail. Choose the right ring size and secure your optic.

What This Mount Does for Your Merkel

The INNOMOUNT quick-release mount is designed for rifles with a Weaver/Picatinny rail, including Merkel models. It provides a secure and stable attachment for your optic, allowing you to remove and reattach it without losing zero—provided you follow the correct installation procedure.

This guide covers the steps to mount the INNOMOUNT on a Merkel rifle, from selecting the right ring size to final checks. All information is based on the supplied catalog data.

INNOMOUNT Quick-Release Mount: Key Details

  • Montage amovible pour rail Weaver/Picatinny: Designed specifically for rifles with a Weaver/Picatinny rail. Available in ring sizes 26, 30, 34, 35, 36, and 40 mm. You need to match the ring size to your optic's tube diameter. The mount fits standard Weaver/Picatinny rails found on many Merkel rifles.
    Montage amovible pour rail Weaver/Picatinny
    Montage amovible pour rail Weaver/Picatinny
  • Montage amovible pour rail Weaver/Picatinny: Provides a reliable and robust fixation on a Picatinny rail, ensuring stability during shooting sessions. A stable mount is essential for accuracy. The INNOMOUNT is built to hold your optic securely, even under recoil.

Installation Steps

The following steps are based on general best practices for mounting a quick-release system on a Weaver/Picatinny rail. The catalog does not provide specific torque values or step-by-step instructions; use these as a safe sequence.

  1. Select the correct ring size: Measure your optic's tube diameter (e.g., 30 mm for many rifle scopes). Choose the INNOMOUNT variant with the matching ring size from the available options: 26, 30, 34, 35, 36, or 40 mm.
  2. Prepare the rail: Ensure the Weaver/Picatinny rail on your Merkel rifle is clean and free of debris. The mount's clamping mechanism must engage fully with the rail's slots.
  3. Attach the mount base: Place the INNOMOUNT base onto the rail. Align the clamping lugs with the rail slots and tighten the quick-release lever or screws until the base is firmly seated. Do not overtighten; the mount should not wobble.
  4. Install the rings and optic: Place your optic in the rings, ensuring even spacing. Tighten the ring screws gradually in a cross pattern to avoid stressing the tube. The catalog does not specify a torque value; use a torque wrench if available, following the optic manufacturer's recommendations.
  5. Check clearance and function: Verify that the optic clears the rifle's action and barrel. Cycle the bolt (if applicable) to ensure no interference. Test the quick-release function to confirm the mount locks and unlocks smoothly.

What the Catalog Does Not Cover

The supplied catalog information does not include specific torque values, installation instructions, or zeroing procedures for the INNOMOUNT mount. It also does not confirm compatibility with every Merkel model or guarantee return-to-zero performance after repeated removal. For precise installation details, consult the manufacturer's documentation or a qualified gunsmith.

The mount is available in multiple ring sizes, but the catalog does not specify which sizes are best for particular optics or rifle configurations. Measure your optic's tube diameter before ordering.

Gerelateerde artikelen

Customer Service
Home
Producten
Winkelwagen
Profiel