Retour au blog
Guides pratiques 2026-11-20 Precision Optique 0 vues

Blaser Sauer Fixed Mount Installation: A Step-by-Step Guide

Blaser Sauer Fixed Mount Installation: A Step-by-Step Guide

Learn how to install a fixed Blaser Sauer rifle mount using the INNOMOUNT QD system. This guide covers preparation, mounting, and scope fitting for a secure setup.

What the INNOMOUNT QD Fixed Mount Offers

The INNOMOUNT QD fixed mount for Blaser and Sauer rifles is a long-design mount that provides a versatile and secure platform for attaching a scope. Its quick-detach mechanism allows you to remove and reattach the scope without losing zero, making it a practical choice for hunters who need to switch optics or pack the rifle separately. The mount is designed for a range of scopes, giving you flexibility in optic selection.

Product Evidence: INNOMOUNT QD for Blaser Sauer

  • Montage fixe pour carabine Blaser - Sauer: The INNOMOUNT QD for Blaser and Sauer offers a versatile mounting solution with its long design, ensuring secure and quick installation for a range of scopes. The long design provides flexibility in scope placement, and the quick-detach feature is key for hunters who need to switch optics or pack the rifle.
    Montage fixe pour carabine Blaser - Sauer
    Montage fixe pour carabine Blaser - Sauer

Installation Steps for the Fixed Mount

Follow these steps to install the INNOMOUNT QD fixed mount on your Blaser or Sauer rifle. The process assumes you have the correct mount variant and a compatible scope.

  1. 1. Prepare the Rifle and Mount: Ensure the rifle is unloaded and the action is open. Clean the mounting surface on the receiver to remove oil or debris. Inspect the INNOMOUNT QD mount for any damage and confirm the quick-detach mechanism operates smoothly.
  2. 2. Attach the Mount Base: Position the mount base on the receiver rail, aligning it with the recoil lug. Tighten the base screws to the manufacturer's recommended torque (not supplied in the catalog; use a torque wrench if available). Ensure the base is seated evenly.
  3. 3. Fit the Scope Rings: Place the scope in the lower rings, then attach the upper rings. Tighten the ring screws evenly in a crisscross pattern. Do not overtighten; the scope should be held firmly but not deformed. The INNOMOUNT QD accepts a range of scope tube diameters; verify your scope's tube diameter matches the rings.
  4. 4. Perform a Preliminary Alignment: With the mount and scope assembled, mount the assembly onto the rifle. Use a bubble level to ensure the scope is level with the rifle. Adjust the mount position if needed for proper eye relief.
  5. 5. Secure the Quick-Detach Mechanism: Engage the quick-detach levers or knobs according to the mount's design. Ensure they lock firmly. Test the mechanism by removing and reattaching the scope to confirm it seats consistently.

What the Catalog Does Not Cover

The catalog does not specify torque values for the mount base or ring screws. Use a torque wrench and follow the scope manufacturer's recommendations if available. The catalog also does not confirm whether the mount is compatible with all Blaser and Sauer models; verify fitment with your specific rifle model before purchase. The INNOMOUNT QD is a fixed mount, not adjustable for windage or elevation; zeroing is achieved through the scope's adjustments.

Articles connexes

Customer Service
Accueil
Produits
Panier
Profil