Retour au blog
Guides pratiques 2026-11-20 Precision Optique 0 vues

Innomont Multi Rail Picatinny for Blaser: Installation Guide

Innomont Multi Rail Picatinny for Blaser: Installation Guide

Learn how to install the Innomont Multi Rail Picatinny on a Blaser rifle. This guide covers compatible accessories, rail alignment, and mounting steps for a stable optics platform.

What the Innomont Multi Rail Picatinny Does for Your Blaser

The Innomont Multi Rail Picatinny is a 11 mm Picatinny rail designed specifically for Blaser rifles equipped with an 11 mm rail interface. It provides a solid and stable platform for mounting accessories such as optics, red dot sights, and aiming lamps. This rail expands your rifle's versatility without requiring permanent modifications.

Installation Steps

The following steps are based on the supplied catalog information. Always verify compatibility with your specific Blaser model before proceeding.

  1. 1. Confirm Compatibility: Ensure your Blaser rifle has an 11 mm rail. The Innomont Multi Rail Picatinny is designed exclusively for this interface. Check the rail's condition for any debris or damage before installation.
  2. 2. Position the Rail: Place the Innomont Multi Rail Picatinny onto the rifle's 11 mm rail. Align it so that the Picatinny slots run parallel to the barrel and are centered over the receiver. The rail should sit flush against the rifle's mounting surface.
  3. 3. Secure the Mount: Tighten the mounting screws evenly and gradually. The catalog does not specify a torque value, so use a consistent hand-tightening approach. Avoid overtightening, which could damage the rail or the rifle.
  4. 4. Attach Your Accessory: Once the rail is secure, mount your optic, red dot, or other Picatinny-compatible accessory. Ensure the accessory is properly aligned and that all locking mechanisms engage fully before use.

Product Evidence

  • Multi rail Picatinny - Blaser - Innomont: Multi rail Picatinny - Blaser. Le Picatinny de 11 mm est conçu pour offrir une plateforme solide et stable pour le montage d'accessoires sur des armes équipées d'un rail de 11 mm. Confirms that the rail is purpose-built for Blaser rifles with an 11 mm interface, providing a stable base for optics and accessories.
    Multi rail Picatinny - Blaser - Innomont
    Multi rail Picatinny - Blaser - Innomont
  • Multi rail Picatinny - Blaser - Innomont: Ce rail permet de fixer des optiques, des point rouge, des lampes de visée, etc., offrant ainsi une grande polyvalence d'utilisation. Highlights the rail's versatility: it supports multiple accessory types, making it a flexible upgrade for your Blaser.

What the Catalog Does Not Cover

The supplied catalog does not include specific torque values for the mounting screws, nor does it provide step-by-step installation instructions beyond the general description. For detailed assembly, refer to the manufacturer's manual or contact Precision Optique for additional guidance. The rail is available in a Standard variant; no other options are confirmed in the catalog.

Articles connexes

Customer Service
Accueil
Produits
Panier
Profil